Things to pay attention to when using LCD splicing screen

[China Glass Net] LCD splicing screen has other stable performance that can not be compared with other displays, can support 7*24 hours of uninterrupted work; LCD splicing well-known enterprise Shenzhen Di Aidi Electronics Co., Ltd. professional technical engineer said, and LCD splicing screen usually Has a long service life, such as the life of the Emperor Aidi LCD splicing screen is up to 100,000 hours, the LCD splicing screen generally rarely fails during use, and the reason for its failure is generally because it has not been maintained for a long time. Maintenance, such that the internal components of the internal components are severely aging, leading to failures. Emperor Ai said that the daily maintenance must not be neglected during the use of the LCD splicing screen.

The failure of the LCD splicing screen, which has not been maintained for a long time, is a relatively headline problem, and the faulty parts are the main parts of the system. If the problem is serious, then the maintenance cost will far exceed the cost of its daily maintenance. If it is economically considered, it will undoubtedly increase the cost of use. Therefore, in the daily use of LCD splicing screen must develop the following good habits:

Try to avoid pointing your finger at the screen with your fingers. Because the LCD splicing screen is very delicate and the resistance is relatively poor, it is easy to increase the bad points, which is why some users will find more and more bad points when using for a while. This situation cannot be reversed and remedied. In addition, do not open the back cover of the LCD splicing screen under power, even after the power is off, the instantaneous voltage is high, and the CFL transformer in the background lighting assembly still has a high voltage of about 1000V.

Maintain a dry environment. The internal design of the LCD splicing screen is very precise. If the environment is wet, it will easily cause oxidative corrosion and short circuit, which will bring huge economic losses to the user. Therefore, try to keep the LCD splicing screen dry and use environment. If you find moisture on the screen surface, wipe it off with a soft cloth before turning on the power. If the moisture has entered the LCD splicing screen, the LCD splicing screen must be placed in a well ventilated or warm place to allow the water to evaporate. If the situation is more serious, ordinary users can ask professionals to help solve. Do not allow the LCD splicing screen to work when the moisture is not removed. Otherwise, the liquid crystal electrode will be corroded, which will cause the LCD splicing screen to be damaged for a long time.

Correctly clean the LCD splicing screen. The LCD splicing screen has been used for a long time, and it is easy to have some dust and dirt. It is inevitable to clean the LCD splicing screen. When cleaning, we should use the correct cleaning method: use a soft, non-fibre cotton wool, lens paper or soft cloth to absorb a little glass cleaner, gently wipe off the dust or dirt on the screen.

Easy Care Shirt

Easy Care Shirt,Easy Care Quality Cotton Shirts,Easy Care Long Sleeve Shirts,Easy Care Men Shirts

ShaoXing TianHao Garment Making Co., Ltd , https://www.sxthapparel.com

Posted on