![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
[China Aluminum Art Network News] Advantages and Disadvantages of Aluminum Alloy Swing Doors
Advantages of the swing door: good sealing
At the beginning of the design, the swing door is the most primitive shape of the door. At that time, it was required to effectively prevent wind and sand dust, or other impurities from entering the house, so the sealing performance was required to be absolutely high. The swing door is protected by a layer of glue around the other doors, which can be effectively isolated when in use.
Swing door advantage 2: high security
The swing door is relatively high in safety performance compared to other categories. The swing door can be installed with a lock at the time of use, and for the average family, the swing door is made of a relatively hard material, which is very convenient and safe to use.
Swing door advantage three: more materials
There are many materials for making swing doors, and various materials such as wood, glass, plastic, etc. can be used to make swing doors, so in terms of price, there are more choices for swing doors. Every family or business can choose the price and materials of the swing door according to its own conditions.
Flat door shortcoming one: single style
For the swing door, it is used in a very simple way, and its relative style will be relatively simple. The swing door can only be used by flat pull, which is destined to be in a range. And must meet the height of the door frame.
Swing door disadvantage 2: low space utilization rate
The use of the swing door requires a certain amount of space, and the space occupied cannot be used twice. This is very inconvenient for small-sized houses or owners or users with high space requirements. Moreover, the requirements for the hardware of the swing door are relatively high, because the reason for frequent use, the use rate of the door cutting is very high, and the quality needs to be better, otherwise the service life of the door will be reduced.
Swing door purchase points:
1. Consumers should select the appropriate swing door according to the actual requirements of the door opening size, opening direction and color pattern of the living room.
2 , inspection process quality: should pay special attention to check for welding defects, such as open welding, non-welding, leakage welding and so on. Check whether the cooperation between the door leaf and the door frame is dense, whether the gap is uniform, whether the opening is flexible, whether all the joints are dense, and the surface of the door panel should be treated with anti-corrosion treatment. Generally, it should be painted and sprayed. The surface of the paint layer should be free of air bubbles, uniform color and large. Most doors also have a rubber seal on the door frame that does not emit a harsh metal impact when the door is closed.
Swing door
How to install aluminum alloy swing door
First, the swing door installation instructions:
1. First remove the door leaf from the split line of the door frame.
2. Fold off the aluminum strips under the door frame and turn the fixing pieces on both sides of the door frame to a position suitable for installation.
3. Push the door frame from the front of the door hole to determine the front and rear position of the door frame.
4. Pay special attention to the fact that the flatness and verticality of the door frame must be adjusted with a level gauge to adjust the opening distance of the door leaf between the door lock frame and the door hinge frame.
5. After confirming that there is no problem with the adjustment size, fix the door frame fixing piece to the wall.
6. Re-insert the door leaf into the door hinge and check whether the door opening is smooth and firm.
Second, the swing door installation attention points:
1. The installation of the swing door should pay attention to the assembly quality, the joint should be flat, and the frame fan should not be smashed or cornered.
2 , the surface layer of pollution bite, construction does not pay attention to the protection of the finished product, not cleaned up in time.
3 , surface scratches, should be strictly protected with hard objects to clean the surface of the dirt.
4 , glass cutting size is not well mastered, did not measure the size according to the real thing, after cutting does not meet the installation requirements, too large or too small.
5. The mortar and debris in the notch are not cleaned properly. The cleaning should be carried out carefully. The glass is not allowed to be inspected.
Swing door
6. Nylon tops, rubber strips are missing or the length is not in place. The sealing material should be selected according to the design requirements, and it should be replenished in time after being lost.
7. If the rubber bead is not properly selected, the sealing effect is not good. The sealing rubber strip is easy to be disengaged at the corner. The glue should be glued under the sealing strip to make it firmly combined with the glass and the frame fan.
8. The glass is not cleaned or cracked. After the glass is installed, clean it with a soft cloth or cotton thread in time to achieve transparency and brightness. The cracked glass is found to be replaced in time.
Â
Plaid Fabric,Tartan Fabric,Check Fabric,Checked Fabric
Jiangyin Yaze Wool Textile Co. LTD , https://www.ya-ze.com