![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Rings and bracelets are favored by many ladies and friends, but many people often neglect an important problem when shopping. When you have chosen a valuable, beautiful, long-awaited bracelet or ring that you find that you can't wear it because of the size of the caliber, is it very lost? Here are the following points for everyone to summarize, how to properly measure your own hands, and then wear the right jewelry? (Friends who buy rings or bracelets must collect and learn!)
Ring measurement method
As shown below
Note: (The diameter can be calculated according to the circumference calculation formula of the circle. The diameter is not the ring size. You can find the ring size using the perimeter or diameter table.) Of course, if there is a ring, it is much simpler, and the inner diameter of the ring is directly measured. Yes. If you don't say much, just attach a picture of the diameter of the measuring ring.
Comparison table of perimeter and ring number (this comparison table is for reference only)
Bracelet measurement method
When choosing the size of the bracelet, it depends on the diameter of the inner ring of the bracelet. There are two ways to measure how big the inner diameter bracelet is. They are the soft tape measurement method and the ruler measurement method. Generally, we use the soft tape measurement method. Prevail.
Soft tape measurement
Hold the tip of your thumb on the base of the little finger, pay attention to it, don't be too tight and not too loose. Use a soft ruler or a line around the circumference of the widest part of the palm. If the hand is soft, the woman can measure it tightly. The hard bone of the hand can be measured to the extent that the line is tight. Divide the resulting length by 0.314, which is the diameter of the inner ring of your bracelet. For example, the left hand measures 16.8 cm (168 mm), and after 0.314, the bracelet suitable for wearing the inner ring of 53.5 mm can be determined. Need to be slightly loose or slightly tight, plus or minus 1-2cm before and after, is the actual size of your hand, the size of the bracelet. You can also refer to the table below to choose.
Because the degree of the ellipse of the jadeite is different, so we will help you carefully calculate each of the noble bracelets. It is not that you have a round bracelet with 54 and you can bring a chaise longue with a long diameter of 54. (In general, you should add 1-2mm to facilitate the wearing of the bracelet. For the elderly and the larger and harder the hand, you should add 3-4mm).
Ruler measurement
The palm is naturally spread out, so that the index finger and the thumb are at a right angle of 90 degrees, and the ruler 0 scale is aligned with a 90 degree angle to measure the widest part of the palm. The measured data is compared with the table below. You can know how big the bracelet you can wear with a simple conversion!
Bracelet inner diameter: commonly known in the industry as "circle", generally refers to the diameter of the bracelet, the noble bracelet is generally said to be the long diameter.
Bracelet thickness: Generally measure the thickness of the bracelet, the thickness from the inner ring to the outermost ring is the thickness of the bracelet.
Bracelet width: Generally measure the width of the bracelet, the width of the standard round bracelet is the thickness, and the balance of the safety bracelet and the chaise bracelet is the width of the flat mouth.
Kids Equestrian,Breeches Equestrian,Children'S Base Layer Top,Children'S Equestrian Jacket
Guangzhou Muxin Sporting Goods.Ltd. , https://www.muxinsports.com