Non-woven adhesive formulation

Crosslinked copolymerized emulsion-1
Component dosage / g component dosage / g
Vinyl acetate 92.0 2-allylamine dichlorotriazine 1.0
Acrylic acid 0.9 N-methylol acrylamide 5.2
Acrylamide 0.9

Preparation and curing Weigh in order and mix well.

Use This film has a strong film strength and a small surface adhesion. It is used as a raw material for coatings, a binder, a sealing material, a paper processing agent, a binder for printing inks, or an additive for cement or gypsum.

Votives are more of normal candles with a lower melting point. The wax gets accumulated on burning, to collect which you need specific Votive Candle holder. The wax melts, liquefies and gets fully consumed by the flaming wick at the surface of the holder to keep the surrounding area clean from any mess.
As the votives melt onto the surface, one needs to be very careful while shopping for the holders. It should either have tapered material or bowl shape to ensure that the melted wax burns away by pooling towards the center. A minor mistake in the selection of candle stand can create a huge mess of unused wax to be cleaned up after the party.

Flat Top Votive Candle

Flat Top Votive Candle,Unscented Votive Candle,Color Votive Candles,Votive Candles Liquefy

Shenyang Shengjie Candle CO.,LTD , https://www.sj-candle.com

Posted on