High Quality Gear Border Embroidered Woven Patch

All pictures we show here only for reference and not be reproduced without license.
Thanks for your attention!

Our factory successfully manufactured millons of good quality badge, Embroidery badge, Embroidery patch, embroidery label, Fashion Embroidery badge, metal badge etc with competitive price for many years in China

Type: Embroidery Red Skeleton Badge/ Embroideru Patch

1. Material of Embroidery badge: Twill, felt, polyester and so on.

2. Process of Embroidery badge: Die-cast or die-struck, plating, hard enamel or soft enamel.

3. Thread: Ray on, polyester, UV, metallic thread.

4. Backing: Iron on, plastic, velcro, magnet etc.

5. Edge: Laser cut, knife cut, merrowed, sew on.

6. Various designs, size and finish are available.

7. Delivery: 6-8 days for samples, 10-15 days for production.

8. Shipping: Via Air freight, by sea or by FedEx/DHL/TNT/UPS/EMS/Express.

9. Freight charge: Our company is the VIP customer of FedEx and DHL, so we can get a competitive lower freight charge.

10. Our products are high quality with competitive price.

11. Please do not hesitate to give us a call or send an email if you have any questions at all. We are more than happy to answer even the smallest question for you and we will gladly give you a bib on any item you are interested in.

12. We welcome customer's own design, please feel free to contact us for the further details about our Embroidery Badge.  
Our Advantages:
No MOQ limited
5% off for your first order
Cheap freight charge. By door to door delivery

FAQ?
1. Why does fill colors need metal border for Cloisonne?
Not only for "Hard-enamel/Cloisonné", but also for "Pro-enamel, Soft-enamel & Etching", these metal borders are of major importance in the purpose of separating each single-colored zone.
 
2. Is it possible to have 2 plating on the same item?
Surely, "double plating" can be done.
 
3. How can I get samples for my own design? 
First please send your design or sketch or photo to us, you can just tell us your idea also. 
As soon as received it, we will check and consult with you for all details, like what process will be the best fit, what plating you want, the size, etc. Considering your requirements and budget, we'll use our rich experience and make our best recommendation to you. 
According to your requirement, we will make an artwork and send to you for approval. 
Once everything decided, we will set up a new mould and make samples, so you'll get samples in hand within 5-7 days.
 
4. How can I check the shipping situation of my order when it has been shipped?
Once your order is shipped, a shipping advise will be sent to you immediately with all the information concerning this shipment as well as the tracking number, so enable you to check it.
 
5. What's your lead time for sample and mass production?
Normally we can deliver samples within 5-10 working days upon the processing way. Mass production depends on the process you need and quantity, usually we can make delivery 7-15 days from the receipt of L/C or deposit.
 
6. How about your minimum order quantity (MOQ)?
We have no MOQ limit usually, both for large quantity as 200,000pcs or small quantity as 20pcs, we'll give the same warmly welcome.
 
7. Can I get the price list of your products?
Because of the fluctuant price in material, we can only give you a price list for your reference; it may not be considered as a stable offer. For firm quotation, please contact your sales rep
 
8. What information is required to get a quotation?
To calculate the cost, you'd better send a photo or just a sketch to us, and advise your requirements also: what material? plating? color? size? quantity and process?
 
9. How to send your artwork?
You can send as an email attachment (Max 5 MB), or send by courier.
If your artwork concerns Offset Printing, send uncompressed tiff file is the best, Photo shop is ok too. The more clear artwork you provide, the more nice print result you'll get.
 
10. What payment methods you require?
Total amount is less than USD 300.0 by Western Union or Paypal.If customer want to pay by TT, please add TT transaction charge USD25/time.
Total amount is more than USD1,000 by TT.
Total amount is more than USD30,000, Irrevocalbe L/C at sight is also workable.
Whenever you have any questions, please don't hesitate to contact us, we are always right here and eager to serve you.

 
Company Information

Web: www.kindomcraft.com
TEL : 86-760-2211 9630
----------------------------------------------------------

All pictures we show here only for reference and not be reproduced without license.
Thanks for your attention!

Our factory successfully manufactured millons of good quality badge, Embroidery badge, Embroidery patch, embroidery label, Fashion Embroidery badge, metal badge etc with competitive price for many years in China

Type: Embroidery Red Skeleton Badge/ Embroideru Patch

1. Material of Embroidery badge: Twill, felt, polyester and so on.

2. Process of Embroidery badge: Die-cast or die-struck, plating, hard enamel or soft enamel.

3. Thread: Ray on, polyester, UV, metallic thread.

4. Backing: Iron on, plastic, velcro, magnet etc.

5. Edge: Laser cut, knife cut, merrowed, sew on.

6. Various designs, size and finish are available.

7. Delivery: 6-8 days for samples, 10-15 days for production.

8. Shipping: Via Air freight, by sea or by FedEx/DHL/TNT/UPS/EMS/Express.

9. Freight charge: Our company is the VIP customer of FedEx and DHL, so we can get a competitive lower freight charge.

10. Our products are high quality with competitive price.

11. Please do not hesitate to give us a call or send an email if you have any questions at all. We are more than happy to answer even the smallest question for you and we will gladly give you a bib on any item you are interested in.

12. We welcome customer's own design, please feel free to contact us for the further details about our Embroidery Badge.  
Our Advantages:
No MOQ limited
5% off for your first order
Cheap freight charge. By door to door delivery

FAQ?
1. Why does fill colors need metal border for Cloisonne?
Not only for "Hard-enamel/Cloisonné", but also for "Pro-enamel, Soft-enamel & Etching", these metal borders are of major importance in the purpose of separating each single-colored zone.
 
2. Is it possible to have 2 plating on the same item?
Surely, "double plating" can be done.
 
3. How can I get samples for my own design? 
First please send your design or sketch or photo to us, you can just tell us your idea also. 
As soon as received it, we will check and consult with you for all details, like what process will be the best fit, what plating you want, the size, etc. Considering your requirements and budget, we'll use our rich experience and make our best recommendation to you. 
According to your requirement, we will make an artwork and send to you for approval. 
Once everything decided, we will set up a new mould and make samples, so you'll get samples in hand within 5-7 days.
 
4. How can I check the shipping situation of my order when it has been shipped?
Once your order is shipped, a shipping advise will be sent to you immediately with all the information concerning this shipment as well as the tracking number, so enable you to check it.
 
5. What's your lead time for sample and mass production?
Normally we can deliver samples within 5-10 working days upon the processing way. Mass production depends on the process you need and quantity, usually we can make delivery 7-15 days from the receipt of L/C or deposit.
 
6. How about your minimum order quantity (MOQ)?
We have no MOQ limit usually, both for large quantity as 200,000pcs or small quantity as 20pcs, we'll give the same warmly welcome.
 
7. Can I get the price list of your products?
Because of the fluctuant price in material, we can only give you a price list for your reference; it may not be considered as a stable offer. For firm quotation, please contact your sales rep
 
8. What information is required to get a quotation?
To calculate the cost, you'd better send a photo or just a sketch to us, and advise your requirements also: what material? plating? color? size? quantity and process?
 
9. How to send your artwork?
You can send as an email attachment (Max 5 MB), or send by courier.
If your artwork concerns Offset Printing, send uncompressed tiff file is the best, Photo shop is ok too. The more clear artwork you provide, the more nice print result you'll get.
 
10. What payment methods you require?
Total amount is less than USD 300.0 by Western Union or Paypal.If customer want to pay by TT, please add TT transaction charge USD25/time.
Total amount is more than USD1,000 by TT.
Total amount is more than USD30,000, Irrevocalbe L/C at sight is also workable.
Whenever you have any questions, please don't hesitate to contact us, we are always right here and eager to serve you.

 
Company Information

Web: www.kindomcraft.com
TEL : 86-760-2211 9630
----------------------------------------------------------

Hot Fix Machine

Rhinestone Machine,Sequin Machine,Hotfix Machine

Huagui Mechanical Electronic Manufacturing Co., Ltd. , http://www.computerembroiderymachine.com