![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Core Tip: People drink bottled water is pure and healthy, but if the water supply of the water dispenser is not thoroughly cleaned, it will lead to secondary pollution of water quality. How to avoid secondary pollution and thoroughly clean up the water dispenser?
Before giving the water dispenser a "bath", Master Lin first introduced the structure and function of the water dispenser: the water dispenser is usually the bottle neck of the bottled water and then placed on the "smart seat" of the water dispenser, and then by the soft inside the machine. The tube introduces water into two water bladders, one of which is a hot water bladder and the other is a cold water bladder. In addition to functioning as hot and cold water, the two water bladders also act to precipitate impurities in the water.
Master Lin said that in life, people often repeat the replacement of bottled water, but neglected that there is still a certain amount of water in the inner tank of the water dispenser. The water will hide the pathogenic bacteria. Over time, it will become a breeding ground for bacteria. hotbed. Therefore, the cold and hot water in the barreled water dispenser will not multiply bacteria, viruses, sediment residues, heavy metals or even red worms in three months without washing, which seriously endangers people's health.
Therefore, Master Lin reminded: "The drinking fountain should be cleaned at least once every two months."
Several steps to clean the water dispenser:
1. Unplug the power plug, remove the water bucket, and open the drain pipe (usually a white plastic knob) on the back of the water dispenser to drain the remaining water. Then, turn on the hot and cold water switch to release the water.
The most notable part of this link is that the drain pipe of the vertical water dispenser is usually located behind the machine, while the desktop water dispenser is located at the bottom of the machine. The user should lift the tabletop water dispenser to see it.
2. Rotate counterclockwise, remove the “smart seat†(that is, the part of the water dispenser that contacts the spring water tank), and carefully scrub the inner and outer sides of the water dispenser liner and lid with alcohol cotton to prepare for the next disinfection.
3. Dispose of disinfectant water according to the instructions of the decontamination effervescent tablet or disinfectant (decontamination effervescent tablets and special disinfectant supermarkets are sold, the price is not expensive), the water dispenser is introduced, so that the disinfection water fills the entire cavity, and the indwelling 10-15 minutes.
It is worth noting in this link: If there is no decontamination effervescent tablet, disinfectant or disinfectant, you can burn a pot of hot water and introduce the hot water into the water dispenser, also for 10-15 minutes. This method aims to eliminate bacteria in the high temperature.
4. Turn on all the switches of the water dispenser, including the drain pipe and the water drain switch, and drain the disinfectant or boiled water. To ensure that the disinfectant is drained, try to rinse it several times with boiling water or purified water.
5. After rinsing a few times, tilt the dispenser to the back side, drain the liquid that was inadvertently dripped during the cleaning process, and wipe the outside and back of the fuselage with a dry rag.
6. After the water dispenser is cleaned, there may be traces of water dispenser cleaning solution remaining, which cannot be consumed immediately. Water should be released first, until the discharged water has no chlorine smell to be safe to drink.
Men's Suits
Men's Suits
Guangzhou Hanguang Fashion Co.,Ltd , https://www.aliuniform.com